Content Dev:IC Avatar Collision Shapes
From Reallusion Wiki!
Revision as of 22:13, 17 August 2020 by Chuck (RL) (Talk | contribs) (→CC3+ Basic Collision Shape Structure)
- Main article: CC Content Development.
Production Instructions and Restrictions
- The number of Collision Shapes in the whole body of each character cannot exceed 16 (there is an upper limit for calculating collisions).
- Do not use Box for Collision Shape when Create New.
- Try not to circle the Collision Shape beyond the scope of the Mesh, especially the head.
- Collision Shape from the upper edge of the chest to the shoulders, placed in the area of the neck.
- The limbs try to use the widest area of the Mesh as the diameter of the Collision Shape, especially the thighs.
- The Collision Shape of the torso must be coherent, without gaps.
- Be sure to weigh the ass and chest to avoid side leakage.
- Recommendation: Try to use Capsule shape for the chest to prop up the slope for the area between the clavicle to chest.
CC3+ Basic Collision Shape Structure
The collision shapes below are all capsules:
-
-
-
Parts Areas Quantity Direction A Head x1 Y-axis B Neck x1 Y-axis Shoulder to Chest x1 Z-axis Chest x2 Y-axis C Lower Chest x1 Z-axis D Limbs x8 Y-axis E Waist to the buttocks x2 Y-axis
We recommend you download the CC3+ Neutral ini file to start off the adjustment process.
